The process
Shaft furnace direct reduction with reformed gas needs process gas compressors on the reducing gas loop and dedusting on the ore and product handling. The fan duties are the material handling extraction and the reformer flue gas.
The gas
Fume from arc, induction or reverberatory furnaces, hot and carrying fine metallic oxide dust. Temperature is handled by dilution air or a cooler ahead of the filter, and the fan sits on the clean side where possible.
Fans in this process
| Duty | What it does here | Type usually selected |
|---|---|---|
| Fume Exhaust System | Hoods, ducting and an exhaust fan that capture fume at source and deliver it to a scrubber, bag filter or stack. | Backward inclined and radial tipped |
| Dust Collector Fan | The fan behind a bag filter, cyclone or multiclone on a dust extraction system. | Backward inclined and radial tipped |
| Bag Filter Fan | Pulls the process gas through the filter bags and discharges the cleaned gas to the stack. | Backward curved and radial tipped |
| ID Fan | Sits at the outlet of a boiler, kiln or furnace and draws the flue gas through the plant to the stack. | Backward curved, backward inclined and radial tipped |
| High Pressure Blower | Delivers combustion, aeration and conveying air where the system resistance runs to several thousand millimetres of water column in a single stage.. | Backward curved and radial tipped |
Industries
Related processes
Waste Heat Recovery BoilersRotary Lime KilnsVertical Shaft Lime KilnsSponge Iron Rotary KilnsBlast Furnace Hot Blast StovesSinter PlantsCoke Oven BatteriesElectric Arc Furnace SteelmakingInduction Furnace Melt ShopsLadle Furnaces and Secondary MetallurgySteel Reheating FurnacesHeat Treatment FurnacesForge ShopsFerro Alloy Submerged Arc FurnacesIron and Non-ferrous FoundriesHot Dip Galvanising Lines